page_banner

2000 type progressive distributor


Detail

Tags

Performance Characteristics

Progressive oil supply, slice structure (consisting of the first film and 3-10 working film tails) is suitable for high pressure working conditions, the maximum pressure: 25Mpa.

Standard displacement: 0.16-1.12ml/cyc in various specifications.

It is easy to monitor, and can be configured with cycle indicator rod or cycle switch.

Use medium: lubricating oil≥N68#, grease NLGI000#-2#.

Suitable for medium pressure working conditions, the maximum nominal pressure: 16Mpa.

Lubrication points available for each group of distributors: 3-20 points.

1

Selection Eules

1. Section divider displacement code T indicates that the working piece is the oil outlet on both sides; S indicates that the working piece is a single-sided oil outlet, and the suffixes L and R indicate the direction of the outlet.

2. Under any circumstances, the user shall not block the outlet of the valve to avoid damage to the valve due to overpressure.

1

Product Parameter

MIN-MAX
PRESSURE (MPA)
INLET SIZE OUTLET SIZE WORKING CHIP SIZE(MM) INSTALL HOLE DISTANCE(MM) INSTALL THREAD LENGTH (A) OUTLET PIPE DIA(MM) WORKING
TEMPERATURE
1.4-25 M12*1.5 M10*1 80*45*19 32 4-M6 A=32+N*20.5N
CHIP NUMBER
STANDARD
6MM
-20℃ TO +60℃
WORKING CHIPS STANDARD FLOW Each chip outlet quantity
2000-10T 0.16 2
2000-10S 0.32 1
2000-15T 0.24 2
2000-15S 0.48 1
2000-20T 0.32 2
2000-20S 0.64 1
2000-25T 0.4 2
2000-25S 0.8 1
2000-30T 0.48 2
2000-30S 0.96 1
2000-35T 0.56 2
2000-35S 1.12 1

  • Previous:
  • Next:

  • Write your message here and send it to us